What is casting resin and how do I use it?

The casting resin is an advanced epoxy resin system you can use for your floors. It is always recommended to calculate the resin volume needed for casting before actually starting to work on your floor.

If casting parts have a thickness greater than 10 mm, we recommend that this be done in layers for the best outcome. If you don’t follow this rule and decide to pour the respective parts in layers thicker than 10 mm, cracks, yellowing of the material or sweeping may occur, and your floor will be permanently damaged. Nobody wants that. We recommend you follow the specialists’ advice if you’re going to have the best results. 

Stanstips Savings For Casting Resin [Today Deals]

Another good piece of advice is to ALWAYS allow surface drying and cooling after passing the exothermic tip before pouring the next layer. Specialists know what they are talking about, for sure.

For best results, follow the steps below:

1. Let the first layer dry.
2. Lightly sand the surface.
3. Clean the surface.
4. Pour the next layer.
5. For coloring epoxy resin, we recommend the use of metallic pigments.
6. For easy mixing of this product, use special resin mixing glasses.

This product is the best for your floor, but you need to know how to use it with best practice. Never allow anyone to give you a piece of advice on some subject you never asked about. Only specialists can tell you how to best use a product for the very best outcome. Trust them, and you will see the results for yourself!

Conclusion

Maybe now you are wondering where to buy the epoxy resin yourself. Do you need epoxy resin for your floor right now? It’s simple. You can purchase casting resin at the SquidPoxy online store or at one of the their locations. It’s your choice. Use it wisely according to the specialists’ advice! 

• Essential Features To Look For When Buying A Contact Grill In 2021
• Weber 121020 Go Anywhere Charcoal Grill In 2021 [Updated Review]